WVSN，WVSG，WVSL Two line divider is an advance product transformed from abroad. It has function of high pressure ,outlet exactly and work reliable ,especially its outlet ports can be adjusted convincible on the spot according the need. These dividers are applied on the two line concentrical lubrication system of nominal pressure 40MPa, to distribute the lubricant to the lube points quantity.
Characteristic of structure：
1. With upper and lower outlet ports ,the oil outputs from each port alternately while the discharge by plunger on the opposite directions.
2. With motion indicate adjuster , the top screw can adjust the output capacity needed , can distinguish the divider work condition via observed the motion of indicate pin;
3. Can exchange the number of outlet port (exception WVSN ),to plug the port on useful , then discharged double from another end of same plunger.
Appearance and dimensions
| Type |
N.pressure MPa |
Starting pressure MPa |
Outlet port numbers |
Output/port,stroke ML |
Adjustment on turn of screw ML |
|
| max | min | |||||
| WVSN□-※ | 40 | ≧1 | 2,4,6,8 | 2.5 | 0.2 | 0.05 |
| WVSG□-※ | 2.3 | 0.5 | 0.10 | |||
| WVSL□-※ | 5.0 | 1.2 | 0.13 | |||
Types：
“□”--outlet port number;
Note:
“-※”-- indicator & adjustment:
-KR （ indicate pin）； -D （adjusting screw）;
-KS ( indicate pin & limit switch);
-KD (adjusting screw & indicate rod)。
Applicable medium:grease, the penetration 220(25℃, 150g) 1/10mm, or oil, viscosity >68cSt
Ambient temperature: -20～+80℃.
